Konfigurasi EIGRP di Cisco Packet Tracer

Pertama kita buat sebuah jaringan sederhana... 

Pemberian IP Address pada masing-masing PC yang terhubung..

- Pemberian IP pada PC '1'... 

 - Pemberian IP pada PC '2'...

- Pemberian IP pada PC '3'...  

- ROUTER ke-1 'Router A'

     --- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: no


Press RETURN to get started!



Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 192.168.1.1 255.255.255.0
Router(config-if)#no shut

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#int se2/0
Router(config-if)#ip add 10.10.4.1 255.0.0.0
Router(config-if)#band 64
Router(config-if)#cl ra 64000
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#exit

Konfigurasi RIP pada 'Router A'..


Router(config)#router eigrp 2
Router(config-router)#net 192.168.1.1 
Router(config-router)#net 10.10.4.1 
Router(config-router)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
wr
Building configuration...
[OK]
Router#


- ROUTER ke-2 'Router B' 

  --- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: no


Press RETURN to get started!



Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 192.168.2.1 255.255.255.0
Router(config-if)#no shut

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#int se2/0
Router(config-if)#ip add 10.10.4.2 255.0.0.0
Router(config-if)#band 64
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#exit 

Router(config-if)#exit
Router(config)#int se3/0
Router(config-if)#ip add 172.16.2.1 255.255.0.0
Router(config-if)#band 64
Router(config-if)#cl ra 64000
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to down
Router(config-if)#exit  

Konfigurasi RIP pada 'Router B' ..


Router(config)#router eigrp 2
Router(config-router)#net 192.168.2.1
Router(config-router)#net 10.10.4.2
Router(config-router)#net 172.16.2.1 
Router(config-router)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
wr
Building configuration...
[OK]
Router#



- ROUTER ke-2 'Router C' 

     --- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: no


Press RETURN to get started!



Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 192.168.4.1 255.255.255.0
Router(config-if)#no shut

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#int se2/0
Router(config-if)#ip add 172.16.2.2 255.255.0.0 
Router(config-if)#band 64
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#exit



Konfigurasi RIP pada 'Router C' ..


Router(config)#router eigrp 2
Router(config-router)#net 192.168.4.1 
Router(config-router)#net 172.16.2.2 
Router(config-router)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
wr
Building configuration...
[OK]
Router#



Setelah dikonfigurasi, coba di ping dari PC Atas, Tengah dan Bawah..... 


SILAHKAN MENCOBA.